----------------------------------------------------------------

 Printer Driver Installation
 (With a USB connection)

  Copyright (C) 2005 Pitney Bowes Inc./ Brother Industries, Ltd.

----------------------------------------------------------------
****************************************************************

Note:
* Before starting the installation, make sure that the LPS-1 
  is not connected to the computer.
* Be sure to carefully read the installation procedure described
  below, and connect the machine when you are instructed to do so.
  In addition, quit all other applications before starting the 
  installation.

* Place the downloaded file in any folder, such as "C:\WORK" 
  decompress it, and then start it up. If this operation is 
  performed from the desktop, it may not start up correctly.
* Follow the procedure below when connecting the LPS-1 to 
  a computer using a USB cable.
  In addition, a USB cable cannot be used to connect a computer
  running Windows 95 or Windows NT 4.0.

****************************************************************

1. Make sure that the LPS-1 is not connected to the computer.
2. Start up "dsetupu.exe" in the folder that was decompressed.
3. If the LPS-1 printer driver has already been installed, 
   continue with step 4.
   If the printer driver is being installed for the first time,
   skip to step 9.
4. If a message appears, stating that an old driver has been 
   detected, click the OK button to close the message.
5. The Driver Setup (Pitney Bowes LPS-1) dialog box that 
   appears allows you to select whether to replace, add or delete
   the printer driver. (If the choices are not available, 
   skip to step 9.)
   If the choices are available, select "Delete Pitney Bowes LPS-1",
   and then click the Next button.
6. In the dialog box that appears, asking for confirmation to
   delete the printer driver, click the Yes button.
7. After the printer driver is deleted, a dialog box containing 
   the message "Pitney Bowes LPS-1 was correctly deleted." appears.
   If a dialog box appears, explaining that the computer should
   be restarted, select "Yes, restart immediately.", and then click
   the Finish button. 
   The computer is restarted.
   If you are not prompted to restart the computer, click the 
   Finish button, and then restart the computer.
8. After the computer is restarted, start up "dsetupu.exe" in the
   folder that was decompressed.
9. In the Driver Setup (Pitney Bowes LPS-1) dialog box that appears,
   click the Next button.
10.A dialog box containing the message "Preparing for setup..."
   appears, and then the message "Preparation for setup is finished."
   appears. Connect the LPS-1 to the computer, and then turn it on.
11.The driver for the LPS-1 is automatically installed.
   In the dialog box that appears, containing the message 
   "Pitney Bowes LPS-1 was correctly added.", click the Finish button.
   This completes the installation.
   If the Add Printer Wizard started up without the LPS-1 driver 
   automatically being installed , click the
   Cancel button to close the Add Printer Wizard. 
   Then, click the Finish button in the Driver Setup (Pitney Bowes 
   LPS-1) dialog box, and restart the computer.
   Afterwards, repeat the procedure from step 8.